In the process of installing rubber seals, we need to pay attention to several points in the installation process, so what are the main points of installing rubber seals?
One of the key points in the installation process of rubber seals: Avoid damaging the sealing surface or sealing line of the surface of the seal. The sealing performance of the flat seal depends on the upper and lower end faces; special protection and care should be given during the handling, installation and storage. Damage often leaves a lot of hidden dangers to the sealed part.
The second point of the installation process of rubber seals: Do not install forcibly. Some seals are placed in a groove-shaped stuffing box. At this time, they need to be installed tightly. Do not be rough or brutal during construction. Forced installation with large movements will damage the seal. The original prefabricated structure is like breaking the prefabricated concrete and filling it into the required part, which will inevitably lead to disaster. The installation of such seals must be very careful and careful, and the embedding must be carried out step by step.
The third point of the installation process of the rubber seal: balance and symmetry should be paid attention to when installing, and the seal should be placed in a position that just tightly ties the effective sealing surface (or lip line).
