Rubber ball Silicone ball is used in medicine, minerals, machinery, food, metallurgy, vibrating screen and other industries.
How to use glue ball
(1) Normal pitch
The number of cooling pipes in one side and one process of the condenser is 7%-13%. Depending on the length of time required for one rubber ball cycle, take the lower limit or upper limit or its close value. The time for a rubber ball cycle is generally 30 seconds as the limit .
(2) Gum ball replenishment cycle or replacement cycle
The rubber ball replenishment cycle is a total of 7 runs of the rubber ball cleaning system. The replenishment cycle can also be adjusted according to the specific conditions of the unit.
The rubber ball replacement cycle, according to the statistics of domestic ball use, the replacement cycle is the cumulative operation of the rubber ball cleaning system 60 times.
In addition, after being immersed in water for a period of time, individual rubber balls may swell too much, causing the diameter to exceed the standard. When refilling and replacing rubber balls, they should be replaced in time to prevent the cooling pipe from being blocked.
Appearance and scope of application of rubber ball
1. The pores are uniform and the size of the pores is basically close.
2. The hole lacks glue, the depth is not more than 3mm, the depth is less than 2mm, each ball is not more than 3, and the total area of the lack of glue is not more than 10% of the surface area.
3. Applicable water temperature: up to 140 ℃
4. Applicable pipe materials: copper pipe, stainless steel pipe, titanium pipe.
5. Rubber ball characteristics: soft, medium soft, medium hard, and hard.
