When it comes to rubber seals, many people have the impression that it is characterized by an O-shaped ring, which is not wrong. This is indeed a major feature of it. Many people think that the use of this type of product is very simple, but the fact is that if it is not used in place, it may cause damage and loss in advance. Therefore, we need to know more about the things that should be paid attention to during installation in order to be able to use it normally and avoid it. problem.
When installing and using rubber sealing rings, we must pay attention not to overuse. The general product life is 3000～5000h. After exceeding, the new sealing ring should be replaced immediately. When replacing a new seal ring, it is necessary to be careful about its process performance, and it is clear that there are no shortcomings such as small round holes, protrusions, cracks, and concave grooves and sufficient ductility to be put into use normally. When disassembling and replacing, strictly inspect the groove of the sealing ring, clean the debris inside, and polish the bottom of the groove. Don't pretend to be wrong or ruin your lips. If the lips are damaged above 50μm, it will cause very obvious oil leakage.
When installing the rubber seal ring, avoid compulsory installation and do not use a hammer to knock it in. Use common tools to first press the seal to the hole wall. The replacement product specifications must be consistent.
